Remove unused code

Author: Tom-Willemsen

IPS/IPS-IOC-01App/Db/scpi_system_alarms.db

@@ -94,20 +94,8 @@ record(stringout, "$(P)STS:SYSTEM:ALARMS:_NAME:PBOARD") {
 record(aSub, "$(P)STS:_POLLSYSTEM:ALARMS_SUB") {
   field(SNAM, "handle_system_alarm_status")
   field(INPA, "$(P)STS:_POLLSYSTEM:ALARMS NPP NMS")
-#  field(INPB, "$(P):STS:SYSTEM:ALARMS:_NAME:TBOARD")
-#  field(INPC, "$(P):STS:SYSTEM:ALARMS:_NAME:10TBOARD")
-#  field(INPD, "$(P):STS:SYSTEM:ALARMS:_NAME:LBOARD")
-#  field(INPE, "$(P):STS:SYSTEM:ALARMS:_NAME:PBOARD")
   field(FTA, "CHAR")
-  field(FTB, "STRING")
-  field(FTC, "STRING")
-  field(FTD, "STRING")
-  field(FTE, "STRING")
   field(NOA, "1000")
-  field(NOB, "1")
-  field(NOC, "1")
-  field(NOD, "1")
-  field(NOE, "1")
 
   field(OUTA, "$(P)STS:SYSTEM:ALARM:TBOARD PP")
   field(OUTB, "$(P)STS:SYSTEM:ALARM:10TBOARD PP")

IPS/iocBoot/iocIPS-IOC-01/st.cmd

@@ -87,7 +87,7 @@ cd "${TOP}/iocBoot/${IOC}"
 iocInit
 
 ## Start any sequence programs
-seq cryomagnet, "FIELD=$(P)FIELD,FIELD_SETPOINT=$(P)FIELD:SP,FIELD_SETPOINT_ALARM=$(P)FIELD:SP.SEVR,FIELD_SETPOINT_READBACK=$(P)FIELD:SP:RBV,FIELD_SETPOINT_RAW=$(P)FIELD:SP:_RAW,PERSISTENT=$(P)PERSISTENT,MAGNET_FIELD=$(P)MAGNET:FIELD:PERSISTENT,HEATER_STATUS=$(P)HEATER:STATUS,HEATER_STATUS_SP=$(P)HEATER:STATUS:SP,HEATER_WAIT_TIME=$(P)HEATER:WAITTIME,ACTIVITY=$(P)ACTIVITY,ACTIVITY_SP=$(P)ACTIVITY:SP,SWEEPMODE=$(P)SWEEPMODE:PARAMS,SWEEPMODE_SP=$(P)SWEEPMODE:PARAMS:SP,SUPPLYVOLTAGE_STABLE=$(P)SUPPLY:VOLT:STABLE,SWEEP_ACTIVE=$(P)STS:SWEEPMODE:SWEEP,STATEMACHINE=$(P)STATEMACHINE,HEATER_ONTIME_OK=$(P)HEATER:ONTIME_OK")
+seq cryomagnet, "FIELD=$(P)FIELD,FIELD_SETPOINT=$(P)FIELD:SP,FIELD_SETPOINT_ALARM=$(P)FIELD:SP.SEVR,FIELD_SETPOINT_READBACK=$(P)FIELD:SP:RBV,FIELD_SETPOINT_RAW=$(P)FIELD:SP:_RAW,PERSISTENT=$(P)PERSISTENT,MAGNET_FIELD=$(P)MAGNET:FIELD:PERSISTENT,HEATER_STATUS=$(P)HEATER:STATUS,HEATER_STATUS_SP=$(P)HEATER:STATUS:SP,HEATER_WAIT_TIME=$(P)HEATER:WAITTIME,ACTIVITY=$(P)ACTIVITY,ACTIVITY_SP=$(P)ACTIVITY:SP,SWEEPMODE=$(P)SWEEPMODE:PARAMS,SWEEPMODE_SP=$(P)SWEEPMODE:PARAMS:SP,SUPPLYVOLTAGE_STABLE=$(P)SUPPLY:VOLT:STABLE,SWEEP_ACTIVE=$(P)STS:SWEEPMODE:SWEEP,STATEMACHINE=$(P)STATEMACHINE,HEATER_ONTIME_OK=$(P)HEATER:ONTIME_OK"
 
 ##ISIS## Stuff that needs to be done after iocInit is called e.g. sequence programs 
 < $(IOCSTARTUP)/postiocinit.cmd