🚀 SSH for GitHub Actions

English | 繁體中文 | 简体中文

Table of Contents

• 🚀 SSH for GitHub Actions
  • Table of Contents
  • 📖 Introduction
  • 🧩 Core Concepts & Input Parameters
    • 🔌 Connection Settings
    • 🛠️ SSH Command Settings
    • 🌐 Proxy Settings
  • 📤 Output Variables
  • ⚡ Quick Start
  • 🔑 SSH Key Setup & OpenSSH Compatibility
    • Setting Up SSH Keys
      • Generate RSA key
      • Generate ED25519 key
    • OpenSSH Compatibility
  • 🛠️ Usage Scenarios & Advanced Examples
    • Using password authentication
    • Using private key authentication
    • Multiple commands
    • Run commands from a file
    • Multiple hosts
    • Multiple hosts with different ports
    • Synchronous execution on multiple hosts
    • Pass environment variables to shell script
    • Capturing command output
  • 🌐 Proxy & Jump Host Usage
  • 🛡️ Security Best Practices
    • Protecting Your Private Key
    • Host Fingerprint Verification
  • 🚨 Error Handling & Troubleshooting
    • Q&A
      • Command not found (npm or other command)
  • 🤝 Contributing
  • 📝 License

---

📖 Introduction

SSH for GitHub Actions is a powerful GitHub Action for executing remote SSH commands easily and securely in your CI/CD workflows.
Built with Golang and drone-ssh, it supports a wide range of SSH scenarios, including multi-host, proxy, and advanced authentication.

---

🧩 Core Concepts & Input Parameters

This action provides flexible SSH command execution with a rich set of configuration options.

For full details, see action.yml.

🔌 Connection Settings

These parameters control how the action connects to your remote host.

Parameter	Description	Default
host	SSH host address
port	SSH port number	22
username	SSH username
password	SSH password
protocol	SSH protocol version (tcp, tcp4, tcp6)	tcp
sync	Run synchronously if multiple hosts are specified	false
timeout	Timeout for SSH connection to host	30s
key	Content of SSH private key (e.g., raw content of ~/.ssh/id_rsa)
key_path	Path to SSH private key
passphrase	Passphrase for the SSH private key
fingerprint	SHA256 fingerprint of the host public key
use_insecure_cipher	Allow additional (less secure) ciphers	false
cipher	Allowed cipher algorithms. Uses sensible defaults if unspecified

---

🛠️ SSH Command Settings

These parameters control the commands executed on the remote host and related behaviors.

Parameter	Description	Default
script	Commands to execute remotely
script_path	Path to a file in the repository containing commands to execute remotely
envs	Environment variables to pass to the shell script
envs_format	Flexible configuration for environment variable transfer
allenvs	Pass all environment variables with GITHUB_ and INPUT_ prefixes to the script	false
command_timeout	Timeout for SSH command execution	10m
debug	Enable debug mode	false
request_pty	Request a pseudo-terminal from the server	false
curl_insecure	Allow curl to connect to SSL sites without certificates	false
capture_stdout	Capture standard output from commands as action output	false
version	drone-ssh binary version. If not specified, the latest version will be used.

---

🌐 Proxy Settings

These parameters control the use of a proxy (jump host) for connecting to your target host.

Parameter	Description	Default
proxy_host	SSH proxy host
proxy_port	SSH proxy port	22
proxy_username	SSH proxy username
proxy_password	SSH proxy password
proxy_passphrase	SSH proxy key passphrase
proxy_protocol	SSH proxy protocol version	tcp
proxy_timeout	Timeout for SSH connection to proxy host	30s
proxy_key	Content of SSH proxy private key
proxy_key_path	Path to SSH proxy private key
proxy_fingerprint	SHA256 fingerprint of the proxy host public key
proxy_cipher	Allowed cipher algorithms for the proxy
proxy_use_insecure_cipher	Allow insecure ciphers for the proxy	false

Note: To mimic the removed script_stop option, add set -e at the top of your shell script.

---

📤 Output Variables

This action provides the following outputs that you can use in subsequent steps:

Output	Description
stdout	Standard output of the executed commands (requires capture_stdout: true)

---

⚡ Quick Start

Run remote SSH commands in your workflow with minimal configuration:

name: Remote SSH Command
on: [push]
jobs:
  build:
    name: Build
    runs-on: ubuntu-latest
    steps:
      - name: Execute remote SSH commands using password
        uses: appleboy/ssh-action@v1
        with:
          host: ${{ secrets.HOST }}
          username: ${{ secrets.USERNAME }}
          password: ${{ secrets.PASSWORD }}
          port: ${{ secrets.PORT }}
          script: whoami

Output:

======CMD======
whoami
======END======
out: your_username
===============================================
✅ Successfully executed commands to all hosts.
===============================================

---

🔑 SSH Key Setup & OpenSSH Compatibility

Setting Up SSH Keys

It is best practice to create SSH keys on your local machine (not on a remote server). Log in with the username specified in GitHub Secrets and generate a key pair:

Generate RSA key

ssh-keygen -t rsa -b 4096 -C "[email protected]"

Generate ED25519 key

ssh-keygen -t ed25519 -a 200 -C "[email protected]"

Add the new public key to the authorized keys on your server. Learn more about authorized keys.

# Add RSA key
cat .ssh/id_rsa.pub | ssh user@host 'cat >> .ssh/authorized_keys'

# Add ED25519 key
cat .ssh/id_ed25519.pub | ssh user@host 'cat >> .ssh/authorized_keys'

Copy the private key content and paste it into GitHub Secrets.

# macOS
pbcopy < ~/.ssh/id_rsa
# Ubuntu
xclip < ~/.ssh/id_rsa

Tip: Copy from -----BEGIN OPENSSH PRIVATE KEY----- to -----END OPENSSH PRIVATE KEY----- (inclusive).

For ED25519:

# macOS
pbcopy < ~/.ssh/id_ed25519
# Ubuntu
xclip < ~/.ssh/id_ed25519

See more: SSH login without a password.

Note: Depending on your SSH version, you may also need to:

• Place the public key in .ssh/authorized_keys2
• Set .ssh permissions to 700
• Set .ssh/authorized_keys2 permissions to 640

OpenSSH Compatibility

If you see this error:

ssh: handshake failed: ssh: unable to authenticate, attempted methods [none publickey]

On Ubuntu 20.04+ you may need to explicitly allow the ssh-rsa algorithm. Add this to your OpenSSH daemon config (/etc/ssh/sshd_config or a drop-in under /etc/ssh/sshd_config.d/):

CASignatureAlgorithms +ssh-rsa

Alternatively, use ED25519 keys (supported by default):

ssh-keygen -t ed25519 -a 200 -C "[email protected]"

---

🛠️ Usage Scenarios & Advanced Examples

This section covers common and advanced usage patterns, including multi-host, proxy, and environment variable passing.

Using password authentication

- name: Execute remote SSH commands using password
  uses: appleboy/ssh-action@v1
  with:
    host: ${{ secrets.HOST }}
    username: ${{ secrets.USERNAME }}
    password: ${{ secrets.PASSWORD }}
    port: ${{ secrets.PORT }}
    script: whoami

Using private key authentication

- name: Execute remote SSH commands using SSH key
  uses: appleboy/ssh-action@v1
  with:
    host: ${{ secrets.HOST }}
    username: ${{ secrets.USERNAME }}
    key: ${{ secrets.KEY }}
    port: ${{ secrets.PORT }}
    script: whoami

Multiple commands

- name: Multiple commands
  uses: appleboy/ssh-action@v1
  with:
    host: ${{ secrets.HOST }}
    username: ${{ secrets.USERNAME }}
    key: ${{ secrets.KEY }}
    port: ${{ secrets.PORT }}
    script: |
      whoami
      ls -al

Run commands from a file

- name: File commands
  uses: appleboy/ssh-action@v1
  with:
    host: ${{ secrets.HOST }}
    username: ${{ secrets.USERNAME }}
    key: ${{ secrets.KEY }}
    port: ${{ secrets.PORT }}
    script_path: scripts/script.sh

Multiple hosts

  - name: Multiple hosts
    uses: appleboy/ssh-action@v1
    with:
-     host: "foo.com"
+     host: "foo.com,bar.com"
      username: ${{ secrets.USERNAME }}
      key: ${{ secrets.KEY }}
      port: ${{ secrets.PORT }}
      script: |
        whoami
        ls -al

Default port is 22.

Multiple hosts with different ports

  - name: Multiple hosts
    uses: appleboy/ssh-action@v1
    with:
-     host: "foo.com"
+     host: "foo.com:1234,bar.com:5678"
      username: ${{ secrets.USERNAME }}
      key: ${{ secrets.KEY }}
      script: |
        whoami
        ls -al

Synchronous execution on multiple hosts

  - name: Multiple hosts
    uses: appleboy/ssh-action@v1
    with:
      host: "foo.com,bar.com"
+     sync: true
      username: ${{ secrets.USERNAME }}
      key: ${{ secrets.KEY }}
      port: ${{ secrets.PORT }}
      script: |
        whoami
        ls -al

Pass environment variables to shell script

  - name: Pass environment
    uses: appleboy/ssh-action@v1
+   env:
+     FOO: "BAR"
+     BAR: "FOO"
+     SHA: ${{ github.sha }}
    with:
      host: ${{ secrets.HOST }}
      username: ${{ secrets.USERNAME }}
      key: ${{ secrets.KEY }}
      port: ${{ secrets.PORT }}
+     envs: FOO,BAR,SHA
      script: |
        echo "I am $FOO"
        echo "I am $BAR"
        echo "sha: $SHA"

All environment variables in the env object must be strings. Using integers or other types may cause unexpected results.

Capturing command output

You can capture the standard output of remote commands and use it in subsequent steps:

- name: Execute and capture output
  id: ssh
  uses: appleboy/ssh-action@v1
  with:
    host: ${{ secrets.HOST }}
    username: ${{ secrets.USERNAME }}
    key: ${{ secrets.KEY }}
    port: ${{ secrets.PORT }}
    capture_stdout: true
    script: |
      echo "Hello World"
      hostname

- name: Use captured output
  run: echo "SSH output was ${{ steps.ssh.outputs.stdout }}"

---

🌐 Proxy & Jump Host Usage

You can connect to remote hosts via a proxy (jump host) for advanced network topologies.

+--------+       +----------+      +-----------+
| Laptop | <-->  | Jumphost | <--> | FooServer |
+--------+       +----------+      +-----------+

Example ~/.ssh/config:

Host Jumphost
  HostName Jumphost
  User ubuntu
  Port 22
  IdentityFile ~/.ssh/keys/jump_host.pem

Host FooServer
  HostName FooServer
  User ubuntu
  Port 22
  ProxyCommand ssh -q -W %h:%p Jumphost

GitHub Actions YAML:

  - name: SSH proxy command
    uses: appleboy/ssh-action@v1
    with:
      host: ${{ secrets.HOST }}
      username: ${{ secrets.USERNAME }}
      key: ${{ secrets.KEY }}
      port: ${{ secrets.PORT }}
+     proxy_host: ${{ secrets.PROXY_HOST }}
+     proxy_username: ${{ secrets.PROXY_USERNAME }}
+     proxy_key: ${{ secrets.PROXY_KEY }}
+     proxy_port: ${{ secrets.PROXY_PORT }}
      script: |
        mkdir abc/def
        ls -al

---

🛡️ Security Best Practices

Protecting Your Private Key

A passphrase encrypts your private key, making it useless to attackers if leaked. Always store your private key securely.

  - name: SSH key passphrase
    uses: appleboy/ssh-action@v1
    with:
      host: ${{ secrets.HOST }}
      username: ${{ secrets.USERNAME }}
      key: ${{ secrets.KEY }}
      port: ${{ secrets.PORT }}
+     passphrase: ${{ secrets.PASSPHRASE }}
      script: |
        whoami
        ls -al

Host Fingerprint Verification

Verifying the SSH host fingerprint helps prevent man-in-the-middle attacks. To get your host's fingerprint (replace ed25519 with your key type and example.com with your host):

ssh example.com ssh-keygen -l -f /etc/ssh/ssh_host_ed25519_key.pub | cut -d ' ' -f2

Update your config:

  - name: SSH key passphrase
    uses: appleboy/ssh-action@v1
    with:
      host: ${{ secrets.HOST }}
      username: ${{ secrets.USERNAME }}
      key: ${{ secrets.KEY }}
      port: ${{ secrets.PORT }}
+     fingerprint: ${{ secrets.FINGERPRINT }}
      script: |
        whoami
        ls -al

---

🚨 Error Handling & Troubleshooting

Q&A

Command not found (npm or other command)

If you encounter "command not found" errors, see this issue comment about interactive vs non-interactive shells.

On many Linux distros, /etc/bash.bashrc contains:

# If not running interactively, don't do anything
[ -z "$PS1" ] && return

Comment out this line or use absolute paths for your commands.

---

🤝 Contributing

Contributions are welcome! Please submit a pull request to help improve appleboy/ssh-action.

---

📝 License

This project is licensed under the MIT License.