Sonoff THR316D - switching relays based on temperature.

[JanPichl]

Hi
I have successfully uploaded the Tasmota firmware to the Sonoff THR316D. Temperature measurement and manual control of both built-in relays works fine. I don't know how to make the relay switch on automatically when the temperature drops below 50°C and switch off automatically when it reaches 60°C. The only thing I could find in the web interface is the time schedule. Please is it possible to set the automatic switching/unswitching of the built-in relays based on the measured temperature?

Thanks

Sorry for the pictures, the installed firmware is in CZ

Main screen

Settings screen

Time schedule screen

[lalo-uy]

In the rules documentation ther is a thermostat example. https://tasmota.github.io/docs/Rules/#simple-thermostat-example El El mar, 26 de set. de 2023 a la(s) 14:05, Jan Pichl < ***@***.***> escribió:

…

Hi I have successfully uploaded the Tasmota firmware to the Sonoff THR316D. Temperature measurement and manual control of both built-in relays works fine. I don't know how to make the relay switch on automatically when the temperature drops below 50°C and switch off automatically when it reaches 60°C. The only thing I could find in the web interface is the time schedule. Please is it possible to set the automatic switching/unswitching of the built-in relays based on the measured temperature? Thanks Sorry for the pictures, the installed firmware is in CZ Main screen [image: obrazek] <https://user-images.githubusercontent.com/26009131/270736331-616c5d03-d705-4ac7-ba44-9dde4fcbca68.png> Settings screen [image: obrazek] <https://user-images.githubusercontent.com/26009131/270737117-76637180-d3a3-446d-8bf1-f1165dd2c4fc.png> Time schedule screen [image: obrazek] <https://user-images.githubusercontent.com/26009131/270737245-104bca4f-2049-40a7-a81c-cdaf4192e2b0.png> — Reply to this email directly, view it on GitHub <#19600>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ACXBW4MU5QK3D3HW3SEMU2LX4MDPHANCNFSM6AAAAAA5IBSPGU> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[jlazkano]

Hello,

I have same device, could you show me how to install the Tasmota firmware? Need I solder any PINs? Or just upload a file in a web interface?

Regards.

[videobuff]

I have the same problem. Connected an USB to RS232, then started various tasmota uploaders. They all stop becuase there is an issue wth a header. I pressed the reset button while powering up, but still no luck. Anyone else ?