From d0debc2c3b52c689ccc9012bd8ffbc9aa50e35d0 Mon Sep 17 00:00:00 2001 From: Tanuj Goswami Date: Mon, 20 Oct 2025 16:38:37 +0200 Subject: [PATCH 1/3] Added print profiles for Eolas Prints Filaments. Details of the brand: https://eolasprints.com --- resources/profiles/BBL.json | 72 +++++++++++++++++++ .../Eolas Prints/Eolas Prints ABS.json | 62 ++++++++++++++++ .../Eolas Prints/Eolas Prints ASA.json | 62 ++++++++++++++++ .../Eolas Prints PETG Transition.json | 62 ++++++++++++++++ .../Eolas Prints PETG UV Resistant.json | 62 ++++++++++++++++ .../Eolas Prints/Eolas Prints PETG.json | 62 ++++++++++++++++ .../Eolas Prints PLA Antibacterial.json | 62 ++++++++++++++++ .../Eolas Prints PLA High Speed.json | 62 ++++++++++++++++ .../Eolas Prints PLA INGEO 850.json | 62 ++++++++++++++++ .../Eolas Prints PLA INGEO 870.json | 62 ++++++++++++++++ .../Eolas Prints/Eolas Prints PLA Matte.json | 62 ++++++++++++++++ .../Eolas Prints/Eolas Prints PLA Neon.json | 62 ++++++++++++++++ .../Eolas Prints PLA Premium.json | 62 ++++++++++++++++ .../Eolas Prints/Eolas Prints PLA Silk.json | 62 ++++++++++++++++ .../Eolas Prints PLA Transition.json | 62 ++++++++++++++++ .../Eolas Prints TPU Flex - 93A.json | 62 ++++++++++++++++ .../Eolas Prints TPU Flex - D53.json | 62 ++++++++++++++++ ...as Prints TPU Flex - D60 UV Resistant.json | 62 ++++++++++++++++ .../Eolas Prints TPU Transition.json | 62 ++++++++++++++++ 19 files changed, 1188 insertions(+) create mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints ABS.json create mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints ASA.json create mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PETG Transition.json create mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PETG UV Resistant.json create mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PETG.json create mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Antibacterial.json create mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA High Speed.json create mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA INGEO 850.json create mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA INGEO 870.json create mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Matte.json create mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Neon.json create mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Premium.json create mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Silk.json create mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Transition.json create mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - 93A.json create mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - D53.json create mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - D60 UV Resistant.json create mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Transition.json diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json index 7e39db6fca..c0246965ea 100644 --- a/resources/profiles/BBL.json +++ b/resources/profiles/BBL.json @@ -6318,6 +6318,78 @@ { "name": "0.56mm Standard @BBL X1C 0.8 nozzle", "sub_path": "process/0.56mm Standard @BBL X1C 0.8 nozzle.json" + }, + { + "name": "Eolas Prints PLA Premium", + "sub_path": "filament/Eolas Prints/Eolas Prints PLA Premium.json" + }, + { + "name": "Eolas Prints PLA Matte", + "sub_path": "filament/Eolas Prints/Eolas Prints PLA Matte.json" + }, + { + "name": "Eolas Prints PLA Silk", + "sub_path": "filament/Eolas Prints/Eolas Prints PLA Silk.json" + }, + { + "name": "Eolas Prints PLA Neon", + "sub_path": "filament/Eolas Prints/Eolas Prints PLA Neon.json" + }, + { + "name": "Eolas Prints PLA High Speed", + "sub_path": "filament/Eolas Prints/Eolas Prints PLA High Speed.json" + }, + { + "name": "Eolas Prints PLA INGEO 850", + "sub_path": "filament/Eolas Prints/Eolas Prints PLA INGEO 850.json" + }, + { + "name": "Eolas Prints PLA INGEO 870", + "sub_path": "filament/Eolas Prints/Eolas Prints PLA INGEO 870.json" + }, + { + "name": "Eolas Prints PLA Antibacterial", + "sub_path": "filament/Eolas Prints/Eolas Prints PLA Antibacterial.json" + }, + { + "name": "Eolas Prints PLA Transition", + "sub_path": "filament/Eolas Prints/Eolas Prints PLA Transition.json" + }, + { + "name": "Eolas Prints PETG", + "sub_path": "filament/Eolas Prints/Eolas Prints PETG.json" + }, + { + "name": "Eolas Prints PETG UV Resistant", + "sub_path": "filament/Eolas Prints/Eolas Prints PETG UV Resistant.json" + }, + { + "name": "Eolas Prints PETG Transition", + "sub_path": "filament/Eolas Prints/Eolas Prints PETG Transition.json" + }, + { + "name": "Eolas Prints TPU Flex 93A", + "sub_path": "filament/Eolas Prints/Eolas Prints TPU Flex - 93A.json" + }, + { + "name": "Eolas Prints TPU D53", + "sub_path": "filament/Eolas Prints/Eolas Prints TPU Flex - D53.json" + }, + { + "name": "Eolas Prints TPU D60 UV", + "sub_path": "filament/Eolas Prints/Eolas Prints TPU Flex - D60 UV Resistant.json" + }, + { + "name": "Eolas Prints TPU Transition", + "sub_path": "filament/Eolas Prints/Eolas Prints TPU Transition.json" + }, + { + "name": "Eolas Prints ABS", + "sub_path": "filament/Eolas Prints/Eolas Prints ABS.json" + }, + { + "name": "Eolas Prints ASA", + "sub_path": "filament/Eolas Prints/Eolas Prints ASA.json" } ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints ABS.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints ABS.json new file mode 100644 index 0000000000..756493dacb --- /dev/null +++ b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints ABS.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Eolas Prints ABS", + "filament_id": "GF_EOLAS_PRINTS_ABS", + "setting_id": "GF_EOLAS_PRINTS_ABS", + "inherits": "fdm_filament_abs", + "instantiation": "true", + "color": "#4d9398", + "cost": 19.50, + "density": 1.04, + "diameter": 1.75, + "nozzle_diameter_profiles": { + "0.2": { + "nozzle_temperature": 260, + "nozzle_temperature_initial_layer": 270, + "bed_temperature": 100, + "bed_temperature_initial_layer": 110, + "max_volumetric_speed": 8, + "speed_print": 80, + "retraction_length": 1.2, + "retraction_speed": 40, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 20, + "fan_speed_initial_layer": 0, + "min_layer_time": 5 + }, + "0.4": { + "nozzle_temperature": 260, + "nozzle_temperature_initial_layer": 270, + "bed_temperature": 100, + "bed_temperature_initial_layer": 110, + "max_volumetric_speed": 18, + "speed_print": 120, + "retraction_length": 1.2, + "retraction_speed": 40, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 20, + "fan_speed_initial_layer": 0, + "min_layer_time": 3 + }, + "0.6": { + "nozzle_temperature": 260, + "nozzle_temperature_initial_layer": 270, + "bed_temperature": 100, + "bed_temperature_initial_layer": 110, + "max_volumetric_speed": 24, + "speed_print": 150, + "retraction_length": 1.2, + "retraction_speed": 40, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 20, + "fan_speed_initial_layer": 0, + "min_layer_time": 3 + } + }, + "printer_models": [ + "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" + ] +} diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints ASA.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints ASA.json new file mode 100644 index 0000000000..480202d1f7 --- /dev/null +++ b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints ASA.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Eolas Prints ASA", + "filament_id": "GF_EOLAS_PRINTS_ASA", + "setting_id": "GF_EOLAS_PRINTS_ASA", + "inherits": "fdm_filament_asa", + "instantiation": "true", + "color": "#4d9398", + "cost": 22.50, + "density": 1.07, + "diameter": 1.75, + "nozzle_diameter_profiles": { + "0.2": { + "nozzle_temperature": 260, + "nozzle_temperature_initial_layer": 270, + "bed_temperature": 105, + "bed_temperature_initial_layer": 115, + "max_volumetric_speed": 8, + "speed_print": 80, + "retraction_length": 1.2, + "retraction_speed": 40, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 30, + "fan_speed_initial_layer": 0, + "min_layer_time": 5 + }, + "0.4": { + "nozzle_temperature": 260, + "nozzle_temperature_initial_layer": 270, + "bed_temperature": 105, + "bed_temperature_initial_layer": 115, + "max_volumetric_speed": 18, + "speed_print": 120, + "retraction_length": 1.2, + "retraction_speed": 40, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 30, + "fan_speed_initial_layer": 0, + "min_layer_time": 3 + }, + "0.6": { + "nozzle_temperature": 260, + "nozzle_temperature_initial_layer": 270, + "bed_temperature": 105, + "bed_temperature_initial_layer": 115, + "max_volumetric_speed": 24, + "speed_print": 150, + "retraction_length": 1.2, + "retraction_speed": 40, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 30, + "fan_speed_initial_layer": 0, + "min_layer_time": 3 + } + }, + "printer_models": [ + "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" + ] +} diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PETG Transition.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PETG Transition.json new file mode 100644 index 0000000000..38d48f30a6 --- /dev/null +++ b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PETG Transition.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Eolas Prints PETG Transition", + "filament_id": "GF_EOLAS_PRINTS_PETG_TRANSITION", + "setting_id": "GF_EOLAS_PRINTS_PETG_TRANSITION", + "inherits": "fdm_filament_petg", + "instantiation": "true", + "color": "#4d9398", + "cost": 2400, + "density": 1.27, + "diameter": 1.75, + "nozzle_diameter_profiles": { + "0.2": { + "nozzle_temperature": 240, + "nozzle_temperature_initial_layer": 245, + "bed_temperature": 80, + "bed_temperature_initial_layer": 85, + "max_volumetric_speed": 8, + "speed_print": 70, + "retraction_length": 1.0, + "retraction_speed": 40, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 50, + "fan_speed_initial_layer": 0, + "min_layer_time": 5 + }, + "0.4": { + "nozzle_temperature": 240, + "nozzle_temperature_initial_layer": 245, + "bed_temperature": 80, + "bed_temperature_initial_layer": 85, + "max_volumetric_speed": 15, + "speed_print": 120, + "retraction_length": 1.0, + "retraction_speed": 40, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 50, + "fan_speed_initial_layer": 0, + "min_layer_time": 3 + }, + "0.6": { + "nozzle_temperature": 240, + "nozzle_temperature_initial_layer": 245, + "bed_temperature": 80, + "bed_temperature_initial_layer": 85, + "max_volumetric_speed": 20, + "speed_print": 150, + "retraction_length": 1.0, + "retraction_speed": 40, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 50, + "fan_speed_initial_layer": 0, + "min_layer_time": 3 + } + }, + "printer_models": [ + "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PETG UV Resistant.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PETG UV Resistant.json new file mode 100644 index 0000000000..512e73c7e5 --- /dev/null +++ b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PETG UV Resistant.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Eolas Prints PETG UV Resistant", + "filament_id": "GF_EOLAS_PRINTS_PETG_UV_RESISTANT", + "setting_id": "GF_EOLAS_PRINTS_PETG_UV_RESISTANT", + "inherits": "fdm_filament_petg", + "instantiation": "true", + "color": "#4d9398", + "cost": 30.50, + "density": 1.27, + "diameter": 1.75, + "nozzle_diameter_profiles": { + "0.2": { + "nozzle_temperature": 240, + "nozzle_temperature_initial_layer": 245, + "bed_temperature": 80, + "bed_temperature_initial_layer": 85, + "max_volumetric_speed": 8, + "speed_print": 70, + "retraction_length": 1.0, + "retraction_speed": 40, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 50, + "fan_speed_initial_layer": 0, + "min_layer_time": 5 + }, + "0.4": { + "nozzle_temperature": 240, + "nozzle_temperature_initial_layer": 245, + "bed_temperature": 80, + "bed_temperature_initial_layer": 85, + "max_volumetric_speed": 15, + "speed_print": 120, + "retraction_length": 1.0, + "retraction_speed": 40, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 50, + "fan_speed_initial_layer": 0, + "min_layer_time": 3 + }, + "0.6": { + "nozzle_temperature": 240, + "nozzle_temperature_initial_layer": 245, + "bed_temperature": 80, + "bed_temperature_initial_layer": 85, + "max_volumetric_speed": 20, + "speed_print": 150, + "retraction_length": 1.0, + "retraction_speed": 40, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 50, + "fan_speed_initial_layer": 0, + "min_layer_time": 3 + } + }, + "printer_models": [ + "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PETG.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PETG.json new file mode 100644 index 0000000000..d4e29d51a9 --- /dev/null +++ b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PETG.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Eolas Prints PETG", + "filament_id": "GF_EOLAS_PRINTS_PETG", + "setting_id": "GF_EOLAS_PRINTS_PETG", + "inherits": "fdm_filament_petg", + "instantiation": "true", + "color": "#4d9398", + "cost": 2300, + "density": 1.27, + "diameter": 1.75, + "nozzle_diameter_profiles": { + "0.2": { + "nozzle_temperature": 240, + "nozzle_temperature_initial_layer": 245, + "bed_temperature": 80, + "bed_temperature_initial_layer": 85, + "max_volumetric_speed": 8, + "speed_print": 70, + "retraction_length": 1.0, + "retraction_speed": 40, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 50, + "fan_speed_initial_layer": 0, + "min_layer_time": 5 + }, + "0.4": { + "nozzle_temperature": 240, + "nozzle_temperature_initial_layer": 245, + "bed_temperature": 80, + "bed_temperature_initial_layer": 85, + "max_volumetric_speed": 15, + "speed_print": 120, + "retraction_length": 1.0, + "retraction_speed": 40, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 50, + "fan_speed_initial_layer": 0, + "min_layer_time": 3 + }, + "0.6": { + "nozzle_temperature": 240, + "nozzle_temperature_initial_layer": 245, + "bed_temperature": 80, + "bed_temperature_initial_layer": 85, + "max_volumetric_speed": 20, + "speed_print": 150, + "retraction_length": 1.0, + "retraction_speed": 40, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 50, + "fan_speed_initial_layer": 0, + "min_layer_time": 3 + } + }, + "printer_models": [ + "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Antibacterial.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Antibacterial.json new file mode 100644 index 0000000000..46c8aa6e8d --- /dev/null +++ b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Antibacterial.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Eolas Prints PLA Antibacterial", + "filament_id": "GF_EOLAS_PRINTS_PLA_ANTIBACTERIAL", + "setting_id": "GF_EOLAS_PRINTS_PLA_ANTIBACTERIAL", + "inherits": "fdm_filament_pla", + "instantiation": "true", + "color": "#4d9398", + "cost": 2300, + "density": 1.24, + "diameter": 1.75, + "nozzle_diameter_profiles": { + "0.2": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 216, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 8, + "speed_print": 80, + "retraction_length": 0.8, + "retraction_speed": 35, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 100, + "fan_speed_initial_layer": 0, + "min_layer_time": 5 + }, + "0.4": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 216, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 15, + "speed_print": 150, + "retraction_length": 0.8, + "retraction_speed": 35, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 100, + "fan_speed_initial_layer": 0, + "min_layer_time": 3 + }, + "0.6": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 216, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 20, + "speed_print": 180, + "retraction_length": 0.8, + "retraction_speed": 35, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 100, + "fan_speed_initial_layer": 0, + "min_layer_time": 3 + } + }, + "printer_models": [ + "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA High Speed.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA High Speed.json new file mode 100644 index 0000000000..2a1de85fa4 --- /dev/null +++ b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA High Speed.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Eolas Prints PLA High Speed", + "filament_id": "GF_EOLAS_PRINTS_PLA_HIGH_SPEED", + "setting_id": "GF_EOLAS_PRINTS_PLA_HIGH_SPEED", + "inherits": "fdm_filament_pla", + "instantiation": "true", + "color": "#4d9398", + "cost": 25.50, + "density": 1.24, + "diameter": 1.75, + "nozzle_diameter_profiles": { + "0.2": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 216, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 10, + "speed_print": 100, + "retraction_length": 0.6, + "retraction_speed": 45, + "z_lift": 0.2, + "travel_speed": 150, + "fan_speed": 100, + "fan_speed_initial_layer": 0, + "min_layer_time": 5 + }, + "0.4": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 216, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 17.8, + "speed_print": 200, + "retraction_length": 0.6, + "retraction_speed": 45, + "z_lift": 0.2, + "travel_speed": 150, + "fan_speed": 100, + "fan_speed_initial_layer": 0, + "min_layer_time": 3 + }, + "0.6": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 216, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 24, + "speed_print": 240, + "retraction_length": 0.6, + "retraction_speed": 45, + "z_lift": 0.2, + "travel_speed": 150, + "fan_speed": 100, + "fan_speed_initial_layer": 0, + "min_layer_time": 3 + } + }, + "printer_models": [ + "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA INGEO 850.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA INGEO 850.json new file mode 100644 index 0000000000..55a2829c4a --- /dev/null +++ b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA INGEO 850.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Eolas Prints PLA INGEO 850", + "filament_id": "GF_EOLAS_PRINTS_PLA_INGEO_850", + "setting_id": "GF_EOLAS_PRINTS_PLA_INGEO_850", + "inherits": "fdm_filament_pla", + "instantiation": "true", + "color": "#4d9398", + "cost": 25.50, + "density": 1.24, + "diameter": 1.75, + "nozzle_diameter_profiles": { + "0.2": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 216, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 8, + "speed_print": 80, + "retraction_length": 0.8, + "retraction_speed": 35, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 100, + "fan_speed_initial_layer": 0, + "min_layer_time": 5 + }, + "0.4": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 216, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 15, + "speed_print": 150, + "retraction_length": 0.8, + "retraction_speed": 35, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 100, + "fan_speed_initial_layer": 0, + "min_layer_time": 3 + }, + "0.6": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 216, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 20, + "speed_print": 180, + "retraction_length": 0.8, + "retraction_speed": 35, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 100, + "fan_speed_initial_layer": 0, + "min_layer_time": 3 + } + }, + "printer_models": [ + "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA INGEO 870.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA INGEO 870.json new file mode 100644 index 0000000000..1878476a80 --- /dev/null +++ b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA INGEO 870.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Eolas Prints PLA INGEO 870", + "filament_id": "GF_EOLAS_PRINTS_PLA_INGEO_870", + "setting_id": "GF_EOLAS_PRINTS_PLA_INGEO_870", + "inherits": "fdm_filament_pla", + "instantiation": "true", + "color": "#4d9398", + "cost": 2400, + "density": 1.24, + "diameter": 1.75, + "nozzle_diameter_profiles": { + "0.2": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 216, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 8, + "speed_print": 80, + "retraction_length": 0.8, + "retraction_speed": 35, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 100, + "fan_speed_initial_layer": 0, + "min_layer_time": 5 + }, + "0.4": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 216, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 15, + "speed_print": 150, + "retraction_length": 0.8, + "retraction_speed": 35, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 100, + "fan_speed_initial_layer": 0, + "min_layer_time": 3 + }, + "0.6": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 216, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 20, + "speed_print": 180, + "retraction_length": 0.8, + "retraction_speed": 35, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 100, + "fan_speed_initial_layer": 0, + "min_layer_time": 3 + } + }, + "printer_models": [ + "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Matte.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Matte.json new file mode 100644 index 0000000000..2c07485944 --- /dev/null +++ b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Matte.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Eolas Prints PLA Matte", + "filament_id": "GF_EOLAS_PRINTS_PLA_MATTE", + "setting_id": "GF_EOLAS_PRINTS_PLA_MATTE", + "inherits": "fdm_filament_pla", + "instantiation": "true", + "color": "#4d9398", + "cost": 2200, + "density": 1.24, + "diameter": 1.75, + "nozzle_diameter_profiles": { + "0.2": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 216, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 8, + "speed_print": 80, + "retraction_length": 0.8, + "retraction_speed": 35, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 100, + "fan_speed_initial_layer": 0, + "min_layer_time": 5 + }, + "0.4": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 216, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 15, + "speed_print": 150, + "retraction_length": 0.8, + "retraction_speed": 35, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 100, + "fan_speed_initial_layer": 0, + "min_layer_time": 3 + }, + "0.6": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 216, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 20, + "speed_print": 180, + "retraction_length": 0.8, + "retraction_speed": 35, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 100, + "fan_speed_initial_layer": 0, + "min_layer_time": 3 + } + }, + "printer_models": [ + "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Neon.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Neon.json new file mode 100644 index 0000000000..ffb463519b --- /dev/null +++ b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Neon.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Eolas Prints PLA Neon", + "filament_id": "GF_EOLAS_PRINTS_PLA_NEON", + "setting_id": "GF_EOLAS_PRINTS_PLA_NEON", + "inherits": "fdm_filament_pla", + "instantiation": "true", + "color": "#FF00FF", + "cost": 2500, + "density": 1.24, + "diameter": 1.75, + "nozzle_diameter_profiles": { + "0.2": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 216, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 4, + "speed_print": 60, + "retraction_length": 0.8, + "retraction_speed": 35, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 100, + "fan_speed_initial_layer": 0, + "min_layer_time": 5 + }, + "0.4": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 216, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 8, + "speed_print": 100, + "retraction_length": 0.8, + "retraction_speed": 35, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 100, + "fan_speed_initial_layer": 0, + "min_layer_time": 3 + }, + "0.6": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 216, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 12, + "speed_print": 130, + "retraction_length": 0.8, + "retraction_speed": 35, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 100, + "fan_speed_initial_layer": 0, + "min_layer_time": 3 + } + }, + "printer_models": [ + "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Premium.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Premium.json new file mode 100644 index 0000000000..503ec2e2a9 --- /dev/null +++ b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Premium.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Eolas Prints PLA Premium", + "filament_id": "GF_EOLAS_PRINTS_PLA_PREMIUM", + "setting_id": "GF_EOLAS_PRINTS_PLA_PREMIUM", + "inherits": "fdm_filament_pla", + "instantiation": "true", + "color": "#4d9398", + "cost": 19.90, + "density": 1.24, + "diameter": 1.75, + "nozzle_diameter_profiles": { + "0.2": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 216, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 8, + "speed_print": 80, + "retraction_length": 0.8, + "retraction_speed": 35, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 100, + "fan_speed_initial_layer": 0, + "min_layer_time": 5 + }, + "0.4": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 216, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 15, + "speed_print": 150, + "retraction_length": 0.8, + "retraction_speed": 35, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 100, + "fan_speed_initial_layer": 0, + "min_layer_time": 3 + }, + "0.6": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 216, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 20, + "speed_print": 180, + "retraction_length": 0.8, + "retraction_speed": 35, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 100, + "fan_speed_initial_layer": 0, + "min_layer_time": 3 + } + }, + "printer_models": [ + "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Silk.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Silk.json new file mode 100644 index 0000000000..fc93deb9cf --- /dev/null +++ b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Silk.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Eolas Prints PLA Silk", + "filament_id": "GF_EOLAS_PRINTS_PLA_SILK", + "setting_id": "GF_EOLAS_PRINTS_PLA_SILK", + "inherits": "fdm_filament_pla", + "instantiation": "true", + "color": "#4d9398", + "cost": 2400, + "density": 1.24, + "diameter": 1.75, + "nozzle_diameter_profiles": { + "0.2": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 216, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 4, + "speed_print": 60, + "retraction_length": 0.8, + "retraction_speed": 35, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 100, + "fan_speed_initial_layer": 0, + "min_layer_time": 5 + }, + "0.4": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 216, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 8, + "speed_print": 100, + "retraction_length": 0.8, + "retraction_speed": 35, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 100, + "fan_speed_initial_layer": 0, + "min_layer_time": 3 + }, + "0.6": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 216, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 12, + "speed_print": 130, + "retraction_length": 0.8, + "retraction_speed": 35, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 100, + "fan_speed_initial_layer": 0, + "min_layer_time": 3 + } + }, + "printer_models": [ + "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Transition.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Transition.json new file mode 100644 index 0000000000..55f19978ae --- /dev/null +++ b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Transition.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Eolas Prints PLA Transition", + "filament_id": "GF_EOLAS_PRINTS_PLA_TRANSITION", + "setting_id": "GF_EOLAS_PRINTS_PLA_TRANSITION", + "inherits": "fdm_filament_pla", + "instantiation": "true", + "color": "#4d9398", + "cost": 2100, + "density": 1.24, + "diameter": 1.75, + "nozzle_diameter_profiles": { + "0.2": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 216, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 8, + "speed_print": 80, + "retraction_length": 0.8, + "retraction_speed": 35, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 100, + "fan_speed_initial_layer": 0, + "min_layer_time": 5 + }, + "0.4": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 216, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 15, + "speed_print": 150, + "retraction_length": 0.8, + "retraction_speed": 35, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 100, + "fan_speed_initial_layer": 0, + "min_layer_time": 3 + }, + "0.6": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 216, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 20, + "speed_print": 180, + "retraction_length": 0.8, + "retraction_speed": 35, + "z_lift": 0.4, + "travel_speed": 150, + "fan_speed": 100, + "fan_speed_initial_layer": 0, + "min_layer_time": 3 + } + }, + "printer_models": [ + "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - 93A.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - 93A.json new file mode 100644 index 0000000000..4b7936eb3f --- /dev/null +++ b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - 93A.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Eolas Prints TPU Flex - 93A", + "filament_id": "GF_EOLAS_PRINTS_TPU_FLEX_93A", + "setting_id": "GF_EOLAS_PRINTS_TPU_FLEX_93A", + "inherits": "fdm_filament_tpu", + "instantiation": "true", + "color": "#4d9398", + "cost": 34.99, + "density": 1.21, + "diameter": 1.75, + "nozzle_diameter_profiles": { + "0.2": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 225, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 4, + "speed_print": 50, + "retraction_length": 0.5, + "retraction_speed": 25, + "z_lift": 0.2, + "travel_speed": 120, + "fan_speed": 0, + "fan_speed_initial_layer": 0, + "min_layer_time": 8 + }, + "0.4": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 225, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 8, + "speed_print": 80, + "retraction_length": 0.5, + "retraction_speed": 25, + "z_lift": 0.2, + "travel_speed": 120, + "fan_speed": 0, + "fan_speed_initial_layer": 0, + "min_layer_time": 5 + }, + "0.6": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 225, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 12, + "speed_print": 110, + "retraction_length": 0.5, + "retraction_speed": 25, + "z_lift": 0.2, + "travel_speed": 120, + "fan_speed": 0, + "fan_speed_initial_layer": 0, + "min_layer_time": 5 + } + }, + "printer_models": [ + "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - D53.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - D53.json new file mode 100644 index 0000000000..a1c9216b7d --- /dev/null +++ b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - D53.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Eolas Prints TPU Flex - D53", + "filament_id": "GF_EOLAS_PRINTS_TPU_D53", + "setting_id": "GF_EOLAS_PRINTS_TPU_D53", + "inherits": "fdm_filament_tpu", + "instantiation": "true", + "color": "#4d9398", + "cost": 3400, + "density": 1.21, + "diameter": 1.75, + "nozzle_diameter_profiles": { + "0.2": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 225, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 4, + "speed_print": 50, + "retraction_length": 0.5, + "retraction_speed": 25, + "z_lift": 0.2, + "travel_speed": 120, + "fan_speed": 0, + "fan_speed_initial_layer": 0, + "min_layer_time": 8 + }, + "0.4": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 225, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 8, + "speed_print": 80, + "retraction_length": 0.5, + "retraction_speed": 25, + "z_lift": 0.2, + "travel_speed": 120, + "fan_speed": 0, + "fan_speed_initial_layer": 0, + "min_layer_time": 5 + }, + "0.6": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 225, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 12, + "speed_print": 110, + "retraction_length": 0.5, + "retraction_speed": 25, + "z_lift": 0.2, + "travel_speed": 120, + "fan_speed": 0, + "fan_speed_initial_layer": 0, + "min_layer_time": 5 + } + }, + "printer_models": [ + "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - D60 UV Resistant.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - D60 UV Resistant.json new file mode 100644 index 0000000000..3e7abe8094 --- /dev/null +++ b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - D60 UV Resistant.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Eolas Prints TPU Flex - D60 UV Resistant", + "filament_id": "GF_EOLAS_PRINTS_TPU_D60_UV", + "setting_id": "GF_EOLAS_PRINTS_TPU_D60_UV", + "inherits": "fdm_filament_tpu", + "instantiation": "true", + "color": "#4d9398", + "cost": 37.90, + "density": 1.21, + "diameter": 1.75, + "nozzle_diameter_profiles": { + "0.2": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 225, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 4, + "speed_print": 50, + "retraction_length": 0.5, + "retraction_speed": 25, + "z_lift": 0.2, + "travel_speed": 120, + "fan_speed": 0, + "fan_speed_initial_layer": 0, + "min_layer_time": 8 + }, + "0.4": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 225, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 8, + "speed_print": 80, + "retraction_length": 0.5, + "retraction_speed": 25, + "z_lift": 0.2, + "travel_speed": 120, + "fan_speed": 0, + "fan_speed_initial_layer": 0, + "min_layer_time": 5 + }, + "0.6": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 225, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 12, + "speed_print": 110, + "retraction_length": 0.5, + "retraction_speed": 25, + "z_lift": 0.2, + "travel_speed": 120, + "fan_speed": 0, + "fan_speed_initial_layer": 0, + "min_layer_time": 5 + } + }, + "printer_models": [ + "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Transition.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Transition.json new file mode 100644 index 0000000000..c1a7acc135 --- /dev/null +++ b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Transition.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Eolas Prints TPU Transition", + "filament_id": "GF_EOLAS_PRINTS_TPU_TRANSITION", + "setting_id": "GF_EOLAS_PRINTS_TPU_TRANSITION", + "inherits": "fdm_filament_tpu", + "instantiation": "true", + "color": "#4d9398", + "cost": 22.50, + "density": 1.21, + "diameter": 1.75, + "nozzle_diameter_profiles": { + "0.2": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 225, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 4, + "speed_print": 50, + "retraction_length": 0.5, + "retraction_speed": 25, + "z_lift": 0.2, + "travel_speed": 120, + "fan_speed": 0, + "fan_speed_initial_layer": 0, + "min_layer_time": 8 + }, + "0.4": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 225, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 8, + "speed_print": 80, + "retraction_length": 0.5, + "retraction_speed": 25, + "z_lift": 0.2, + "travel_speed": 120, + "fan_speed": 0, + "fan_speed_initial_layer": 0, + "min_layer_time": 5 + }, + "0.6": { + "nozzle_temperature": 220, + "nozzle_temperature_initial_layer": 225, + "bed_temperature": 60, + "bed_temperature_initial_layer": 65, + "max_volumetric_speed": 12, + "speed_print": 110, + "retraction_length": 0.5, + "retraction_speed": 25, + "z_lift": 0.2, + "travel_speed": 120, + "fan_speed": 0, + "fan_speed_initial_layer": 0, + "min_layer_time": 5 + } + }, + "printer_models": [ + "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" + ] +} \ No newline at end of file From d1e761ebd50d9f09837d12a38215ee231caee8b9 Mon Sep 17 00:00:00 2001 From: Tanuj Goswami Date: Tue, 21 Oct 2025 22:23:03 +0200 Subject: [PATCH 2/3] Removed 0.2 nozzle settings for Eolas Prints TPU Filament Profiles. --- .../Eolas Prints/Eolas Prints TPU Flex - 93A.json | 15 --------------- .../Eolas Prints/Eolas Prints TPU Flex - D53.json | 15 --------------- .../Eolas Prints TPU Flex - D60 UV Resistant.json | 15 --------------- .../Eolas Prints/Eolas Prints TPU Transition.json | 15 --------------- 4 files changed, 60 deletions(-) diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - 93A.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - 93A.json index 4b7936eb3f..8a936698a6 100644 --- a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - 93A.json +++ b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - 93A.json @@ -10,21 +10,6 @@ "density": 1.21, "diameter": 1.75, "nozzle_diameter_profiles": { - "0.2": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 225, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 4, - "speed_print": 50, - "retraction_length": 0.5, - "retraction_speed": 25, - "z_lift": 0.2, - "travel_speed": 120, - "fan_speed": 0, - "fan_speed_initial_layer": 0, - "min_layer_time": 8 - }, "0.4": { "nozzle_temperature": 220, "nozzle_temperature_initial_layer": 225, diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - D53.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - D53.json index a1c9216b7d..1cd2a77227 100644 --- a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - D53.json +++ b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - D53.json @@ -10,21 +10,6 @@ "density": 1.21, "diameter": 1.75, "nozzle_diameter_profiles": { - "0.2": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 225, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 4, - "speed_print": 50, - "retraction_length": 0.5, - "retraction_speed": 25, - "z_lift": 0.2, - "travel_speed": 120, - "fan_speed": 0, - "fan_speed_initial_layer": 0, - "min_layer_time": 8 - }, "0.4": { "nozzle_temperature": 220, "nozzle_temperature_initial_layer": 225, diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - D60 UV Resistant.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - D60 UV Resistant.json index 3e7abe8094..0b52e4268b 100644 --- a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - D60 UV Resistant.json +++ b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - D60 UV Resistant.json @@ -10,21 +10,6 @@ "density": 1.21, "diameter": 1.75, "nozzle_diameter_profiles": { - "0.2": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 225, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 4, - "speed_print": 50, - "retraction_length": 0.5, - "retraction_speed": 25, - "z_lift": 0.2, - "travel_speed": 120, - "fan_speed": 0, - "fan_speed_initial_layer": 0, - "min_layer_time": 8 - }, "0.4": { "nozzle_temperature": 220, "nozzle_temperature_initial_layer": 225, diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Transition.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Transition.json index c1a7acc135..965a0820f8 100644 --- a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Transition.json +++ b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Transition.json @@ -10,21 +10,6 @@ "density": 1.21, "diameter": 1.75, "nozzle_diameter_profiles": { - "0.2": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 225, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 4, - "speed_print": 50, - "retraction_length": 0.5, - "retraction_speed": 25, - "z_lift": 0.2, - "travel_speed": 120, - "fan_speed": 0, - "fan_speed_initial_layer": 0, - "min_layer_time": 8 - }, "0.4": { "nozzle_temperature": 220, "nozzle_temperature_initial_layer": 225, From e3a105a34e78e1180fbd7b337b59b7fb1c283312 Mon Sep 17 00:00:00 2001 From: Tanuj Goswami Date: Mon, 3 Nov 2025 22:29:49 +0100 Subject: [PATCH 3/3] Removed incorrect Eolas print Profiles and added correct profile. --- resources/profiles/BBL.json | 72 +++---------------- .../Eolas Prints/Eolas Prints ABS.json | 62 ---------------- .../Eolas Prints/Eolas Prints ASA.json | 62 ---------------- .../Eolas Prints PETG Transition.json | 62 ---------------- .../Eolas Prints PETG UV Resistant.json | 62 ---------------- .../Eolas Prints/Eolas Prints PETG.json | 62 ---------------- .../Eolas Prints PLA Antibacterial.json | 62 ---------------- .../Eolas Prints PLA High Speed.json | 62 ---------------- .../Eolas Prints PLA INGEO 850.json | 62 ---------------- .../Eolas Prints PLA INGEO 870.json | 62 ---------------- .../Eolas Prints/Eolas Prints PLA Matte.json | 62 ---------------- .../Eolas Prints/Eolas Prints PLA Neon.json | 62 ---------------- .../Eolas Prints PLA Premium @0.2 nozzle.json | 24 +++++++ .../Eolas Prints PLA Premium @0.4 nozzle.json | 24 +++++++ .../Eolas Prints PLA Premium @0.6 nozzle.json | 24 +++++++ .../Eolas Prints PLA Premium @base.json | 25 +++++++ .../Eolas Prints PLA Premium.json | 62 ---------------- .../Eolas Prints/Eolas Prints PLA Silk.json | 62 ---------------- .../Eolas Prints PLA Transition.json | 62 ---------------- .../Eolas Prints TPU Flex - 93A.json | 47 ------------ .../Eolas Prints TPU Flex - D53.json | 47 ------------ ...as Prints TPU Flex - D60 UV Resistant.json | 47 ------------ .../Eolas Prints TPU Transition.json | 47 ------------ 23 files changed, 105 insertions(+), 1120 deletions(-) delete mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints ABS.json delete mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints ASA.json delete mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PETG Transition.json delete mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PETG UV Resistant.json delete mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PETG.json delete mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Antibacterial.json delete mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA High Speed.json delete mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA INGEO 850.json delete mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA INGEO 870.json delete mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Matte.json delete mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Neon.json create mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Premium @0.2 nozzle.json create mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Premium @0.4 nozzle.json create mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Premium @0.6 nozzle.json create mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Premium @base.json delete mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Premium.json delete mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Silk.json delete mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Transition.json delete mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - 93A.json delete mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - D53.json delete mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - D60 UV Resistant.json delete mode 100644 resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Transition.json diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json index febd58ed2f..ea2ab2e740 100644 --- a/resources/profiles/BBL.json +++ b/resources/profiles/BBL.json @@ -6320,76 +6320,20 @@ "sub_path": "process/0.56mm Standard @BBL X1C 0.8 nozzle.json" }, { - "name": "Eolas Prints PLA Premium", - "sub_path": "filament/Eolas Prints/Eolas Prints PLA Premium.json" + "name": "Eolas Prints PLA Premium base", + "sub_path": "filament/Eolas Prints/Eolas Prints PLA Premium @base.json" }, { - "name": "Eolas Prints PLA Matte", - "sub_path": "filament/Eolas Prints/Eolas Prints PLA Matte.json" + "name": "Eolas Prints PLA Premium 0.2 nozzle", + "sub_path": "filament/Eolas Prints/Eolas Prints PLA Premium @0.2 nozzle.json" }, { - "name": "Eolas Prints PLA Silk", - "sub_path": "filament/Eolas Prints/Eolas Prints PLA Silk.json" + "name": "Eolas Prints PLA Premium 0.4 nozzle", + "sub_path": "filament/Eolas Prints/Eolas Prints PLA Premium @0.4 nozzle.json" }, { - "name": "Eolas Prints PLA Neon", - "sub_path": "filament/Eolas Prints/Eolas Prints PLA Neon.json" - }, - { - "name": "Eolas Prints PLA High Speed", - "sub_path": "filament/Eolas Prints/Eolas Prints PLA High Speed.json" - }, - { - "name": "Eolas Prints PLA INGEO 850", - "sub_path": "filament/Eolas Prints/Eolas Prints PLA INGEO 850.json" - }, - { - "name": "Eolas Prints PLA INGEO 870", - "sub_path": "filament/Eolas Prints/Eolas Prints PLA INGEO 870.json" - }, - { - "name": "Eolas Prints PLA Antibacterial", - "sub_path": "filament/Eolas Prints/Eolas Prints PLA Antibacterial.json" - }, - { - "name": "Eolas Prints PLA Transition", - "sub_path": "filament/Eolas Prints/Eolas Prints PLA Transition.json" - }, - { - "name": "Eolas Prints PETG", - "sub_path": "filament/Eolas Prints/Eolas Prints PETG.json" - }, - { - "name": "Eolas Prints PETG UV Resistant", - "sub_path": "filament/Eolas Prints/Eolas Prints PETG UV Resistant.json" - }, - { - "name": "Eolas Prints PETG Transition", - "sub_path": "filament/Eolas Prints/Eolas Prints PETG Transition.json" - }, - { - "name": "Eolas Prints TPU Flex 93A", - "sub_path": "filament/Eolas Prints/Eolas Prints TPU Flex - 93A.json" - }, - { - "name": "Eolas Prints TPU D53", - "sub_path": "filament/Eolas Prints/Eolas Prints TPU Flex - D53.json" - }, - { - "name": "Eolas Prints TPU D60 UV", - "sub_path": "filament/Eolas Prints/Eolas Prints TPU Flex - D60 UV Resistant.json" - }, - { - "name": "Eolas Prints TPU Transition", - "sub_path": "filament/Eolas Prints/Eolas Prints TPU Transition.json" - }, - { - "name": "Eolas Prints ABS", - "sub_path": "filament/Eolas Prints/Eolas Prints ABS.json" - }, - { - "name": "Eolas Prints ASA", - "sub_path": "filament/Eolas Prints/Eolas Prints ASA.json" + "name": "Eolas Prints PLA Premium 0.6 nozzle", + "sub_path": "filament/Eolas Prints/Eolas Prints PLA Premium @0.6 nozzle.json" } ] } \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints ABS.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints ABS.json deleted file mode 100644 index 756493dacb..0000000000 --- a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints ABS.json +++ /dev/null @@ -1,62 +0,0 @@ -{ - "type": "filament", - "name": "Eolas Prints ABS", - "filament_id": "GF_EOLAS_PRINTS_ABS", - "setting_id": "GF_EOLAS_PRINTS_ABS", - "inherits": "fdm_filament_abs", - "instantiation": "true", - "color": "#4d9398", - "cost": 19.50, - "density": 1.04, - "diameter": 1.75, - "nozzle_diameter_profiles": { - "0.2": { - "nozzle_temperature": 260, - "nozzle_temperature_initial_layer": 270, - "bed_temperature": 100, - "bed_temperature_initial_layer": 110, - "max_volumetric_speed": 8, - "speed_print": 80, - "retraction_length": 1.2, - "retraction_speed": 40, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 20, - "fan_speed_initial_layer": 0, - "min_layer_time": 5 - }, - "0.4": { - "nozzle_temperature": 260, - "nozzle_temperature_initial_layer": 270, - "bed_temperature": 100, - "bed_temperature_initial_layer": 110, - "max_volumetric_speed": 18, - "speed_print": 120, - "retraction_length": 1.2, - "retraction_speed": 40, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 20, - "fan_speed_initial_layer": 0, - "min_layer_time": 3 - }, - "0.6": { - "nozzle_temperature": 260, - "nozzle_temperature_initial_layer": 270, - "bed_temperature": 100, - "bed_temperature_initial_layer": 110, - "max_volumetric_speed": 24, - "speed_print": 150, - "retraction_length": 1.2, - "retraction_speed": 40, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 20, - "fan_speed_initial_layer": 0, - "min_layer_time": 3 - } - }, - "printer_models": [ - "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" - ] -} diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints ASA.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints ASA.json deleted file mode 100644 index 480202d1f7..0000000000 --- a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints ASA.json +++ /dev/null @@ -1,62 +0,0 @@ -{ - "type": "filament", - "name": "Eolas Prints ASA", - "filament_id": "GF_EOLAS_PRINTS_ASA", - "setting_id": "GF_EOLAS_PRINTS_ASA", - "inherits": "fdm_filament_asa", - "instantiation": "true", - "color": "#4d9398", - "cost": 22.50, - "density": 1.07, - "diameter": 1.75, - "nozzle_diameter_profiles": { - "0.2": { - "nozzle_temperature": 260, - "nozzle_temperature_initial_layer": 270, - "bed_temperature": 105, - "bed_temperature_initial_layer": 115, - "max_volumetric_speed": 8, - "speed_print": 80, - "retraction_length": 1.2, - "retraction_speed": 40, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 30, - "fan_speed_initial_layer": 0, - "min_layer_time": 5 - }, - "0.4": { - "nozzle_temperature": 260, - "nozzle_temperature_initial_layer": 270, - "bed_temperature": 105, - "bed_temperature_initial_layer": 115, - "max_volumetric_speed": 18, - "speed_print": 120, - "retraction_length": 1.2, - "retraction_speed": 40, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 30, - "fan_speed_initial_layer": 0, - "min_layer_time": 3 - }, - "0.6": { - "nozzle_temperature": 260, - "nozzle_temperature_initial_layer": 270, - "bed_temperature": 105, - "bed_temperature_initial_layer": 115, - "max_volumetric_speed": 24, - "speed_print": 150, - "retraction_length": 1.2, - "retraction_speed": 40, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 30, - "fan_speed_initial_layer": 0, - "min_layer_time": 3 - } - }, - "printer_models": [ - "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" - ] -} diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PETG Transition.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PETG Transition.json deleted file mode 100644 index 38d48f30a6..0000000000 --- a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PETG Transition.json +++ /dev/null @@ -1,62 +0,0 @@ -{ - "type": "filament", - "name": "Eolas Prints PETG Transition", - "filament_id": "GF_EOLAS_PRINTS_PETG_TRANSITION", - "setting_id": "GF_EOLAS_PRINTS_PETG_TRANSITION", - "inherits": "fdm_filament_petg", - "instantiation": "true", - "color": "#4d9398", - "cost": 2400, - "density": 1.27, - "diameter": 1.75, - "nozzle_diameter_profiles": { - "0.2": { - "nozzle_temperature": 240, - "nozzle_temperature_initial_layer": 245, - "bed_temperature": 80, - "bed_temperature_initial_layer": 85, - "max_volumetric_speed": 8, - "speed_print": 70, - "retraction_length": 1.0, - "retraction_speed": 40, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 50, - "fan_speed_initial_layer": 0, - "min_layer_time": 5 - }, - "0.4": { - "nozzle_temperature": 240, - "nozzle_temperature_initial_layer": 245, - "bed_temperature": 80, - "bed_temperature_initial_layer": 85, - "max_volumetric_speed": 15, - "speed_print": 120, - "retraction_length": 1.0, - "retraction_speed": 40, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 50, - "fan_speed_initial_layer": 0, - "min_layer_time": 3 - }, - "0.6": { - "nozzle_temperature": 240, - "nozzle_temperature_initial_layer": 245, - "bed_temperature": 80, - "bed_temperature_initial_layer": 85, - "max_volumetric_speed": 20, - "speed_print": 150, - "retraction_length": 1.0, - "retraction_speed": 40, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 50, - "fan_speed_initial_layer": 0, - "min_layer_time": 3 - } - }, - "printer_models": [ - "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" - ] -} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PETG UV Resistant.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PETG UV Resistant.json deleted file mode 100644 index 512e73c7e5..0000000000 --- a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PETG UV Resistant.json +++ /dev/null @@ -1,62 +0,0 @@ -{ - "type": "filament", - "name": "Eolas Prints PETG UV Resistant", - "filament_id": "GF_EOLAS_PRINTS_PETG_UV_RESISTANT", - "setting_id": "GF_EOLAS_PRINTS_PETG_UV_RESISTANT", - "inherits": "fdm_filament_petg", - "instantiation": "true", - "color": "#4d9398", - "cost": 30.50, - "density": 1.27, - "diameter": 1.75, - "nozzle_diameter_profiles": { - "0.2": { - "nozzle_temperature": 240, - "nozzle_temperature_initial_layer": 245, - "bed_temperature": 80, - "bed_temperature_initial_layer": 85, - "max_volumetric_speed": 8, - "speed_print": 70, - "retraction_length": 1.0, - "retraction_speed": 40, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 50, - "fan_speed_initial_layer": 0, - "min_layer_time": 5 - }, - "0.4": { - "nozzle_temperature": 240, - "nozzle_temperature_initial_layer": 245, - "bed_temperature": 80, - "bed_temperature_initial_layer": 85, - "max_volumetric_speed": 15, - "speed_print": 120, - "retraction_length": 1.0, - "retraction_speed": 40, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 50, - "fan_speed_initial_layer": 0, - "min_layer_time": 3 - }, - "0.6": { - "nozzle_temperature": 240, - "nozzle_temperature_initial_layer": 245, - "bed_temperature": 80, - "bed_temperature_initial_layer": 85, - "max_volumetric_speed": 20, - "speed_print": 150, - "retraction_length": 1.0, - "retraction_speed": 40, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 50, - "fan_speed_initial_layer": 0, - "min_layer_time": 3 - } - }, - "printer_models": [ - "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" - ] -} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PETG.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PETG.json deleted file mode 100644 index d4e29d51a9..0000000000 --- a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PETG.json +++ /dev/null @@ -1,62 +0,0 @@ -{ - "type": "filament", - "name": "Eolas Prints PETG", - "filament_id": "GF_EOLAS_PRINTS_PETG", - "setting_id": "GF_EOLAS_PRINTS_PETG", - "inherits": "fdm_filament_petg", - "instantiation": "true", - "color": "#4d9398", - "cost": 2300, - "density": 1.27, - "diameter": 1.75, - "nozzle_diameter_profiles": { - "0.2": { - "nozzle_temperature": 240, - "nozzle_temperature_initial_layer": 245, - "bed_temperature": 80, - "bed_temperature_initial_layer": 85, - "max_volumetric_speed": 8, - "speed_print": 70, - "retraction_length": 1.0, - "retraction_speed": 40, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 50, - "fan_speed_initial_layer": 0, - "min_layer_time": 5 - }, - "0.4": { - "nozzle_temperature": 240, - "nozzle_temperature_initial_layer": 245, - "bed_temperature": 80, - "bed_temperature_initial_layer": 85, - "max_volumetric_speed": 15, - "speed_print": 120, - "retraction_length": 1.0, - "retraction_speed": 40, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 50, - "fan_speed_initial_layer": 0, - "min_layer_time": 3 - }, - "0.6": { - "nozzle_temperature": 240, - "nozzle_temperature_initial_layer": 245, - "bed_temperature": 80, - "bed_temperature_initial_layer": 85, - "max_volumetric_speed": 20, - "speed_print": 150, - "retraction_length": 1.0, - "retraction_speed": 40, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 50, - "fan_speed_initial_layer": 0, - "min_layer_time": 3 - } - }, - "printer_models": [ - "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" - ] -} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Antibacterial.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Antibacterial.json deleted file mode 100644 index 46c8aa6e8d..0000000000 --- a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Antibacterial.json +++ /dev/null @@ -1,62 +0,0 @@ -{ - "type": "filament", - "name": "Eolas Prints PLA Antibacterial", - "filament_id": "GF_EOLAS_PRINTS_PLA_ANTIBACTERIAL", - "setting_id": "GF_EOLAS_PRINTS_PLA_ANTIBACTERIAL", - "inherits": "fdm_filament_pla", - "instantiation": "true", - "color": "#4d9398", - "cost": 2300, - "density": 1.24, - "diameter": 1.75, - "nozzle_diameter_profiles": { - "0.2": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 216, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 8, - "speed_print": 80, - "retraction_length": 0.8, - "retraction_speed": 35, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 100, - "fan_speed_initial_layer": 0, - "min_layer_time": 5 - }, - "0.4": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 216, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 15, - "speed_print": 150, - "retraction_length": 0.8, - "retraction_speed": 35, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 100, - "fan_speed_initial_layer": 0, - "min_layer_time": 3 - }, - "0.6": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 216, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 20, - "speed_print": 180, - "retraction_length": 0.8, - "retraction_speed": 35, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 100, - "fan_speed_initial_layer": 0, - "min_layer_time": 3 - } - }, - "printer_models": [ - "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" - ] -} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA High Speed.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA High Speed.json deleted file mode 100644 index 2a1de85fa4..0000000000 --- a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA High Speed.json +++ /dev/null @@ -1,62 +0,0 @@ -{ - "type": "filament", - "name": "Eolas Prints PLA High Speed", - "filament_id": "GF_EOLAS_PRINTS_PLA_HIGH_SPEED", - "setting_id": "GF_EOLAS_PRINTS_PLA_HIGH_SPEED", - "inherits": "fdm_filament_pla", - "instantiation": "true", - "color": "#4d9398", - "cost": 25.50, - "density": 1.24, - "diameter": 1.75, - "nozzle_diameter_profiles": { - "0.2": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 216, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 10, - "speed_print": 100, - "retraction_length": 0.6, - "retraction_speed": 45, - "z_lift": 0.2, - "travel_speed": 150, - "fan_speed": 100, - "fan_speed_initial_layer": 0, - "min_layer_time": 5 - }, - "0.4": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 216, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 17.8, - "speed_print": 200, - "retraction_length": 0.6, - "retraction_speed": 45, - "z_lift": 0.2, - "travel_speed": 150, - "fan_speed": 100, - "fan_speed_initial_layer": 0, - "min_layer_time": 3 - }, - "0.6": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 216, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 24, - "speed_print": 240, - "retraction_length": 0.6, - "retraction_speed": 45, - "z_lift": 0.2, - "travel_speed": 150, - "fan_speed": 100, - "fan_speed_initial_layer": 0, - "min_layer_time": 3 - } - }, - "printer_models": [ - "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" - ] -} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA INGEO 850.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA INGEO 850.json deleted file mode 100644 index 55a2829c4a..0000000000 --- a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA INGEO 850.json +++ /dev/null @@ -1,62 +0,0 @@ -{ - "type": "filament", - "name": "Eolas Prints PLA INGEO 850", - "filament_id": "GF_EOLAS_PRINTS_PLA_INGEO_850", - "setting_id": "GF_EOLAS_PRINTS_PLA_INGEO_850", - "inherits": "fdm_filament_pla", - "instantiation": "true", - "color": "#4d9398", - "cost": 25.50, - "density": 1.24, - "diameter": 1.75, - "nozzle_diameter_profiles": { - "0.2": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 216, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 8, - "speed_print": 80, - "retraction_length": 0.8, - "retraction_speed": 35, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 100, - "fan_speed_initial_layer": 0, - "min_layer_time": 5 - }, - "0.4": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 216, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 15, - "speed_print": 150, - "retraction_length": 0.8, - "retraction_speed": 35, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 100, - "fan_speed_initial_layer": 0, - "min_layer_time": 3 - }, - "0.6": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 216, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 20, - "speed_print": 180, - "retraction_length": 0.8, - "retraction_speed": 35, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 100, - "fan_speed_initial_layer": 0, - "min_layer_time": 3 - } - }, - "printer_models": [ - "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" - ] -} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA INGEO 870.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA INGEO 870.json deleted file mode 100644 index 1878476a80..0000000000 --- a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA INGEO 870.json +++ /dev/null @@ -1,62 +0,0 @@ -{ - "type": "filament", - "name": "Eolas Prints PLA INGEO 870", - "filament_id": "GF_EOLAS_PRINTS_PLA_INGEO_870", - "setting_id": "GF_EOLAS_PRINTS_PLA_INGEO_870", - "inherits": "fdm_filament_pla", - "instantiation": "true", - "color": "#4d9398", - "cost": 2400, - "density": 1.24, - "diameter": 1.75, - "nozzle_diameter_profiles": { - "0.2": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 216, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 8, - "speed_print": 80, - "retraction_length": 0.8, - "retraction_speed": 35, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 100, - "fan_speed_initial_layer": 0, - "min_layer_time": 5 - }, - "0.4": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 216, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 15, - "speed_print": 150, - "retraction_length": 0.8, - "retraction_speed": 35, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 100, - "fan_speed_initial_layer": 0, - "min_layer_time": 3 - }, - "0.6": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 216, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 20, - "speed_print": 180, - "retraction_length": 0.8, - "retraction_speed": 35, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 100, - "fan_speed_initial_layer": 0, - "min_layer_time": 3 - } - }, - "printer_models": [ - "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" - ] -} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Matte.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Matte.json deleted file mode 100644 index 2c07485944..0000000000 --- a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Matte.json +++ /dev/null @@ -1,62 +0,0 @@ -{ - "type": "filament", - "name": "Eolas Prints PLA Matte", - "filament_id": "GF_EOLAS_PRINTS_PLA_MATTE", - "setting_id": "GF_EOLAS_PRINTS_PLA_MATTE", - "inherits": "fdm_filament_pla", - "instantiation": "true", - "color": "#4d9398", - "cost": 2200, - "density": 1.24, - "diameter": 1.75, - "nozzle_diameter_profiles": { - "0.2": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 216, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 8, - "speed_print": 80, - "retraction_length": 0.8, - "retraction_speed": 35, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 100, - "fan_speed_initial_layer": 0, - "min_layer_time": 5 - }, - "0.4": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 216, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 15, - "speed_print": 150, - "retraction_length": 0.8, - "retraction_speed": 35, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 100, - "fan_speed_initial_layer": 0, - "min_layer_time": 3 - }, - "0.6": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 216, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 20, - "speed_print": 180, - "retraction_length": 0.8, - "retraction_speed": 35, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 100, - "fan_speed_initial_layer": 0, - "min_layer_time": 3 - } - }, - "printer_models": [ - "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" - ] -} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Neon.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Neon.json deleted file mode 100644 index ffb463519b..0000000000 --- a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Neon.json +++ /dev/null @@ -1,62 +0,0 @@ -{ - "type": "filament", - "name": "Eolas Prints PLA Neon", - "filament_id": "GF_EOLAS_PRINTS_PLA_NEON", - "setting_id": "GF_EOLAS_PRINTS_PLA_NEON", - "inherits": "fdm_filament_pla", - "instantiation": "true", - "color": "#FF00FF", - "cost": 2500, - "density": 1.24, - "diameter": 1.75, - "nozzle_diameter_profiles": { - "0.2": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 216, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 4, - "speed_print": 60, - "retraction_length": 0.8, - "retraction_speed": 35, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 100, - "fan_speed_initial_layer": 0, - "min_layer_time": 5 - }, - "0.4": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 216, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 8, - "speed_print": 100, - "retraction_length": 0.8, - "retraction_speed": 35, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 100, - "fan_speed_initial_layer": 0, - "min_layer_time": 3 - }, - "0.6": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 216, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 12, - "speed_print": 130, - "retraction_length": 0.8, - "retraction_speed": 35, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 100, - "fan_speed_initial_layer": 0, - "min_layer_time": 3 - } - }, - "printer_models": [ - "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" - ] -} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Premium @0.2 nozzle.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Premium @0.2 nozzle.json new file mode 100644 index 0000000000..375316246d --- /dev/null +++ b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Premium @0.2 nozzle.json @@ -0,0 +1,24 @@ +{ + "type": "filament", + "name": "Eolas Prints PLA Premium @0.2 nozzle", + "from": "system", + "instantiation": "true", + "setting_id": "GFS_EOLAS_PRINTS_PLA_PREMIUM_02", + "inherits": "Eolas Prints PLA Premium @base", + "filament_max_volumetric_speed": ["8"], + "slow_down_min_speed": ["5"], + "fan_cooling_layer_time": ["5"], + "slow_down_layer_time": ["5"], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab P1P 0.2 nozzle", + "Bambu Lab P2S 0.2 nozzle", + "Bambu Lab H2 0.2 nozzle", + "Bambu Lab H2S 0.2 nozzle", + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab A1 0.2 nozzle", + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Premium @0.4 nozzle.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Premium @0.4 nozzle.json new file mode 100644 index 0000000000..ef2b129ab6 --- /dev/null +++ b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Premium @0.4 nozzle.json @@ -0,0 +1,24 @@ +{ + "type": "filament", + "name": "Eolas Prints PLA Premium @0.4 nozzle", + "from": "system", + "instantiation": "true", + "setting_id": "GFS_EOLAS_PRINTS_PLA_PREMIUM_04", + "inherits": "Eolas Prints PLA Premium @base", + "filament_max_volumetric_speed": ["15"], + "slow_down_min_speed": ["3"], + "fan_cooling_layer_time": ["3"], + "slow_down_layer_time": ["3"], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab H2 0.4 nozzle", + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Premium @0.6 nozzle.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Premium @0.6 nozzle.json new file mode 100644 index 0000000000..2c8c6fe756 --- /dev/null +++ b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Premium @0.6 nozzle.json @@ -0,0 +1,24 @@ +{ + "type": "filament", + "name": "Eolas Prints PLA Premium @0.6 nozzle", + "from": "system", + "instantiation": "true", + "setting_id": "GFS_EOLAS_PRINTS_PLA_PREMIUM_06", + "inherits": "Eolas Prints PLA Premium @base", + "filament_max_volumetric_speed": ["20"], + "slow_down_min_speed": ["3"], + "fan_cooling_layer_time": ["3"], + "slow_down_layer_time": ["3"], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab H2 0.6 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 mini 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Premium @base.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Premium @base.json new file mode 100644 index 0000000000..064313fb75 --- /dev/null +++ b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Premium @base.json @@ -0,0 +1,25 @@ +{ + "type": "filament", + "name": "Eolas Prints PLA Premium @base", + "from": "system", + "instantiation": "false", + "filament_id": "GF_EOLAS_PRINTS_PLA_PREMIUM", + "inherits": "fdm_filament_pla", + "filament_vendor": "Eolas Prints", + "filament_type": "PLA", + "filament_density": ["1.24"], + "filament_diameter": ["1.75"], + "filament_cost": ["20.00"], + "nozzle_temperature": ["220"], + "nozzle_temperature_initial_layer": ["216"], + "hot_plate_temp": ["60"], + "hot_plate_temp_initial_layer": ["65"], + "default_filament_color": ["#4D9398"], + "filament_retraction_length": ["0.8"], + "filament_retraction_speed": ["35"], + "filament_z_hop": ["0.4"], + "filament_z_hop_types": ["Normal Lift"], + "fan_min_speed": ["100"], + "fan_max_speed": ["100"], + "close_fan_the_first_x_layers": ["1"] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Premium.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Premium.json deleted file mode 100644 index 503ec2e2a9..0000000000 --- a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Premium.json +++ /dev/null @@ -1,62 +0,0 @@ -{ - "type": "filament", - "name": "Eolas Prints PLA Premium", - "filament_id": "GF_EOLAS_PRINTS_PLA_PREMIUM", - "setting_id": "GF_EOLAS_PRINTS_PLA_PREMIUM", - "inherits": "fdm_filament_pla", - "instantiation": "true", - "color": "#4d9398", - "cost": 19.90, - "density": 1.24, - "diameter": 1.75, - "nozzle_diameter_profiles": { - "0.2": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 216, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 8, - "speed_print": 80, - "retraction_length": 0.8, - "retraction_speed": 35, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 100, - "fan_speed_initial_layer": 0, - "min_layer_time": 5 - }, - "0.4": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 216, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 15, - "speed_print": 150, - "retraction_length": 0.8, - "retraction_speed": 35, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 100, - "fan_speed_initial_layer": 0, - "min_layer_time": 3 - }, - "0.6": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 216, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 20, - "speed_print": 180, - "retraction_length": 0.8, - "retraction_speed": 35, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 100, - "fan_speed_initial_layer": 0, - "min_layer_time": 3 - } - }, - "printer_models": [ - "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" - ] -} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Silk.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Silk.json deleted file mode 100644 index fc93deb9cf..0000000000 --- a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Silk.json +++ /dev/null @@ -1,62 +0,0 @@ -{ - "type": "filament", - "name": "Eolas Prints PLA Silk", - "filament_id": "GF_EOLAS_PRINTS_PLA_SILK", - "setting_id": "GF_EOLAS_PRINTS_PLA_SILK", - "inherits": "fdm_filament_pla", - "instantiation": "true", - "color": "#4d9398", - "cost": 2400, - "density": 1.24, - "diameter": 1.75, - "nozzle_diameter_profiles": { - "0.2": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 216, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 4, - "speed_print": 60, - "retraction_length": 0.8, - "retraction_speed": 35, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 100, - "fan_speed_initial_layer": 0, - "min_layer_time": 5 - }, - "0.4": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 216, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 8, - "speed_print": 100, - "retraction_length": 0.8, - "retraction_speed": 35, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 100, - "fan_speed_initial_layer": 0, - "min_layer_time": 3 - }, - "0.6": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 216, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 12, - "speed_print": 130, - "retraction_length": 0.8, - "retraction_speed": 35, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 100, - "fan_speed_initial_layer": 0, - "min_layer_time": 3 - } - }, - "printer_models": [ - "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" - ] -} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Transition.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Transition.json deleted file mode 100644 index 55f19978ae..0000000000 --- a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints PLA Transition.json +++ /dev/null @@ -1,62 +0,0 @@ -{ - "type": "filament", - "name": "Eolas Prints PLA Transition", - "filament_id": "GF_EOLAS_PRINTS_PLA_TRANSITION", - "setting_id": "GF_EOLAS_PRINTS_PLA_TRANSITION", - "inherits": "fdm_filament_pla", - "instantiation": "true", - "color": "#4d9398", - "cost": 2100, - "density": 1.24, - "diameter": 1.75, - "nozzle_diameter_profiles": { - "0.2": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 216, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 8, - "speed_print": 80, - "retraction_length": 0.8, - "retraction_speed": 35, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 100, - "fan_speed_initial_layer": 0, - "min_layer_time": 5 - }, - "0.4": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 216, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 15, - "speed_print": 150, - "retraction_length": 0.8, - "retraction_speed": 35, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 100, - "fan_speed_initial_layer": 0, - "min_layer_time": 3 - }, - "0.6": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 216, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 20, - "speed_print": 180, - "retraction_length": 0.8, - "retraction_speed": 35, - "z_lift": 0.4, - "travel_speed": 150, - "fan_speed": 100, - "fan_speed_initial_layer": 0, - "min_layer_time": 3 - } - }, - "printer_models": [ - "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" - ] -} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - 93A.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - 93A.json deleted file mode 100644 index 8a936698a6..0000000000 --- a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - 93A.json +++ /dev/null @@ -1,47 +0,0 @@ -{ - "type": "filament", - "name": "Eolas Prints TPU Flex - 93A", - "filament_id": "GF_EOLAS_PRINTS_TPU_FLEX_93A", - "setting_id": "GF_EOLAS_PRINTS_TPU_FLEX_93A", - "inherits": "fdm_filament_tpu", - "instantiation": "true", - "color": "#4d9398", - "cost": 34.99, - "density": 1.21, - "diameter": 1.75, - "nozzle_diameter_profiles": { - "0.4": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 225, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 8, - "speed_print": 80, - "retraction_length": 0.5, - "retraction_speed": 25, - "z_lift": 0.2, - "travel_speed": 120, - "fan_speed": 0, - "fan_speed_initial_layer": 0, - "min_layer_time": 5 - }, - "0.6": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 225, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 12, - "speed_print": 110, - "retraction_length": 0.5, - "retraction_speed": 25, - "z_lift": 0.2, - "travel_speed": 120, - "fan_speed": 0, - "fan_speed_initial_layer": 0, - "min_layer_time": 5 - } - }, - "printer_models": [ - "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" - ] -} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - D53.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - D53.json deleted file mode 100644 index 1cd2a77227..0000000000 --- a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - D53.json +++ /dev/null @@ -1,47 +0,0 @@ -{ - "type": "filament", - "name": "Eolas Prints TPU Flex - D53", - "filament_id": "GF_EOLAS_PRINTS_TPU_D53", - "setting_id": "GF_EOLAS_PRINTS_TPU_D53", - "inherits": "fdm_filament_tpu", - "instantiation": "true", - "color": "#4d9398", - "cost": 3400, - "density": 1.21, - "diameter": 1.75, - "nozzle_diameter_profiles": { - "0.4": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 225, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 8, - "speed_print": 80, - "retraction_length": 0.5, - "retraction_speed": 25, - "z_lift": 0.2, - "travel_speed": 120, - "fan_speed": 0, - "fan_speed_initial_layer": 0, - "min_layer_time": 5 - }, - "0.6": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 225, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 12, - "speed_print": 110, - "retraction_length": 0.5, - "retraction_speed": 25, - "z_lift": 0.2, - "travel_speed": 120, - "fan_speed": 0, - "fan_speed_initial_layer": 0, - "min_layer_time": 5 - } - }, - "printer_models": [ - "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" - ] -} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - D60 UV Resistant.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - D60 UV Resistant.json deleted file mode 100644 index 0b52e4268b..0000000000 --- a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Flex - D60 UV Resistant.json +++ /dev/null @@ -1,47 +0,0 @@ -{ - "type": "filament", - "name": "Eolas Prints TPU Flex - D60 UV Resistant", - "filament_id": "GF_EOLAS_PRINTS_TPU_D60_UV", - "setting_id": "GF_EOLAS_PRINTS_TPU_D60_UV", - "inherits": "fdm_filament_tpu", - "instantiation": "true", - "color": "#4d9398", - "cost": 37.90, - "density": 1.21, - "diameter": 1.75, - "nozzle_diameter_profiles": { - "0.4": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 225, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 8, - "speed_print": 80, - "retraction_length": 0.5, - "retraction_speed": 25, - "z_lift": 0.2, - "travel_speed": 120, - "fan_speed": 0, - "fan_speed_initial_layer": 0, - "min_layer_time": 5 - }, - "0.6": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 225, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 12, - "speed_print": 110, - "retraction_length": 0.5, - "retraction_speed": 25, - "z_lift": 0.2, - "travel_speed": 120, - "fan_speed": 0, - "fan_speed_initial_layer": 0, - "min_layer_time": 5 - } - }, - "printer_models": [ - "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" - ] -} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Transition.json b/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Transition.json deleted file mode 100644 index 965a0820f8..0000000000 --- a/resources/profiles/BBL/filament/Eolas Prints/Eolas Prints TPU Transition.json +++ /dev/null @@ -1,47 +0,0 @@ -{ - "type": "filament", - "name": "Eolas Prints TPU Transition", - "filament_id": "GF_EOLAS_PRINTS_TPU_TRANSITION", - "setting_id": "GF_EOLAS_PRINTS_TPU_TRANSITION", - "inherits": "fdm_filament_tpu", - "instantiation": "true", - "color": "#4d9398", - "cost": 22.50, - "density": 1.21, - "diameter": 1.75, - "nozzle_diameter_profiles": { - "0.4": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 225, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 8, - "speed_print": 80, - "retraction_length": 0.5, - "retraction_speed": 25, - "z_lift": 0.2, - "travel_speed": 120, - "fan_speed": 0, - "fan_speed_initial_layer": 0, - "min_layer_time": 5 - }, - "0.6": { - "nozzle_temperature": 220, - "nozzle_temperature_initial_layer": 225, - "bed_temperature": 60, - "bed_temperature_initial_layer": 65, - "max_volumetric_speed": 12, - "speed_print": 110, - "retraction_length": 0.5, - "retraction_speed": 25, - "z_lift": 0.2, - "travel_speed": 120, - "fan_speed": 0, - "fan_speed_initial_layer": 0, - "min_layer_time": 5 - } - }, - "printer_models": [ - "X1C", "X1E", "P1S", "P1", "P2S", "H2", "H2S", "H2D", "A1", "A1_mini" - ] -} \ No newline at end of file