bump stm32g0 version

Author: dotcypress

Cargo.toml

@@ -26,7 +26,7 @@ portable-atomic = { version = "1.10.0", features = ["critical-section"] }
 
 [dependencies.stm32g0]
 package = "stm32g0-staging"
-version = "0.16.0"
+version = "0.17.0"
 features = ["atomics"]
 
 [dependencies.void]

src/analog/adc.rs

@@ -308,7 +308,7 @@ impl Adc {
             .chselr0()
             .modify(|_, w| unsafe { w.bits(1 << PIN::channel()) });
 
-        self.rb.isr().modify(|_, w| w.eos().set_bit());
+        self.rb.isr().modify(|_, w| w.eos().clear_bit_by_one());
         self.rb.cr().modify(|_, w| w.adstart().set_bit());
         while self.rb.isr().read().eos().bit_is_clear() {}
 
@@ -352,14 +352,14 @@ impl Adc {
     }
 
     fn power_up(&mut self) {
-        self.rb.isr().modify(|_, w| w.adrdy().set_bit());
+        self.rb.isr().modify(|_, w| w.adrdy().clear_bit_by_one());
         self.rb.cr().modify(|_, w| w.aden().set_bit());
         while self.rb.isr().read().adrdy().bit_is_clear() {}
     }
 
     fn power_down(&mut self) {
         self.rb.cr().modify(|_, w| w.addis().set_bit());
-        self.rb.isr().modify(|_, w| w.adrdy().set_bit());
+        self.rb.isr().modify(|_, w| w.adrdy().clear_bit_by_one());
         while self.rb.cr().read().aden().bit_is_set() {}
     }
 }

src/exti.rs

@@ -114,7 +114,8 @@ impl ExtiExt for EXTI {
             feature = "stm32g070",
             feature = "stm32g031",
             feature = "stm32g041",
-            feature = "stm32g0b1"
+            feature = "stm32g0b1",
+            feature = "stm32g0c1"
         ))]
         self.imr1()
             .modify(|r, w| unsafe { w.bits(r.bits() | 1 << ev as u8) });

src/flash/mod.rs

@@ -131,7 +131,7 @@ impl WriteErase for UnlockedFlash {
                 }
                 #[cfg(not(feature = "stm32g0x0"))]
                 unsafe {
-                    w.pnb().bits(page.0 as u8);
+                    w.pnb().bits(page.0 as _);
                 }
                 w.strt().set_bit()
             });

src/lib.rs

@@ -40,6 +40,9 @@ pub use stm32g0::stm32g070 as stm32;
 #[cfg(feature = "stm32g0b1")]
 pub use stm32g0::stm32g0b1 as stm32;
 
+#[cfg(feature = "stm32g0c1")]
+pub use stm32g0::stm32g0c1 as stm32;
+
 #[cfg(feature = "rt")]
 pub use crate::stm32::interrupt;
 

src/serial/usart.rs

@@ -886,14 +886,15 @@ uart_full!(USART2, usart2, 1);
     feature = "stm32g030",
     feature = "stm32g031",
     feature = "stm32g041",
-    feature = "stm32g0b1"
+    feature = "stm32g0b1",
+    feature = "stm32g0c1",
 ))]
 uart_basic!(USART2, usart2, 1);
 
-#[cfg(any(feature = "stm32g070", feature = "stm32g071", feature = "stm32g081"))]
+#[cfg(any(feature = "stm32g070", feature = "stm32g071", feature = "stm32g081",))]
 uart_basic!(USART3, usart3, 1);
 
-#[cfg(any(feature = "stm32g070", feature = "stm32g071", feature = "stm32g081"))]
+#[cfg(any(feature = "stm32g070", feature = "stm32g071", feature = "stm32g081",))]
 uart_basic!(USART4, usart4, 1);
 
 // LPUART Should be given its own implementation when it needs to be used with features not present on